bending modulus meaning in Chinese
抗弯模数
弯曲弹性模量
弯曲模量
弯曲模数
弯曲系数
Examples
- Standard test method for apparent bending modulus of plastics by means of a cantilever beam
用悬臂梁法对塑料表观弯曲系数的标准试验方法 - Results showed that , clay was only dispersed in the epoxy phase and had not any effect on the phase separation of epoxy and ctbn . with the increase of clay concentration , the impact strength of composites decreased significantly while the bending modulus increased
结果表明，使用熔融插层法只能制备出粘土完全分散在ep相的三元复合浙江大学硕士论文材料，粘土的加入对橡胶和环氧树脂的相分离过程影响不大。 - The result showed when common montmorillonite , in which the mass fraction of montmorillonite was 75 % , was used as modifier , the bending modulus of the compound increased by more than 60 % , impact strength increased by a factor of 2 , recovery ratio reduced 35 % , and the compound had good processability
结果表明，在采用蒙脱石质量分数为75 %的普通蒙脱土时，专用料弯曲模量提高60 %以上，冲击强度提高一倍，回缩率降低35 % ，并且加工性能良好。 - The results show that fsmf can improve the bend modulus of the resin cast clearly , but reduce the tensile strength . in the suitable content of filler ( not more than 30 % in this experiment ) , fsmf can improve the tensile modulus and bend strength . in the suitable content of filler ( 20 % ~ 30 % in this experiment ) , fsmf can improve the toughness of the resin cast
结果表明： fsmf显著提高树脂浇铸体的弯曲模量，但降低拉伸强度；在合适的填料含量(本实验中为30 )下， fsmf可提高树脂浇铸体的拉抻模量和弯曲强度；在合适的填料含量(本实验中为20 30 )下， fsmf可起到增韧效果，改善树脂浇铸体的断裂韧性。 - The results of the experiment are as follows : the bend strength , bend modulus , stiffness and toughness of the mortar layer will be improved when add 30 % fsmf to resin . the axis tensile strength , stiffness , hardness and weariessness of winding layer will be improved when add 25 % ~ 30 % fsmf to resin
提出了应用设想并进行了实验研究，结果表明:在树脂中加入30 %的fsmf ，可提高夹砂层的弯曲强度、弯曲模量、刚度和韧性;在树脂中加入25吠尸30 %的fsmf ，可提高缠绕层的轴向拉伸强度、刚度、硬度和耐磨性，降低成本。